Sicagen

Archive

  1. Corrosion Inhibitors

    Comments Off on Corrosion Inhibitors

    NON-CHROMATE BORATE AND NITRITE BASEDCOOLING WATER CORROSION INHIBITOR

    (Ortho Phosphate and Phosphonate  based corrosion inhibitor)

     

    General Description:                       

    SCI-3164 is a ortho phosphate and phosphonate based corrosion inhibitor designed for use in cooling water applications where control of corrosion is a major consideration.

     

    Physical properties:

    Appearance               :           Colorless, clear liquid.

                Odor                           :           Slightly pungent.

                Specific gravity         :           1.0 – 1.1

                Viscosity                    :           10- 12 cp at 30 deg.C.

                PH                               :           2.5 –3.5

     

    Dosage:

    SCI-3164 can be fed to the cooling water or makeup water at a rate sufficient to provide a product dosage of 4pm to 6 ppm in the recirculating water.  Routine residual testing is normally unnecessary.  SCI-3164 can be fed neat or from any convenient aqueous dilution.  Continuous feeding is preferable and normal materials of feed pump construction will be suitable.

    15 ppm of SCI-3164  in the circulation water yields 4– 6 ppm of orthophosphate, and 2-3 ppm of organophosphonate in the system.

     

    Packing:

    Our products are supplied in non-returnable 50/100kg.HDPE carboys and 200 kg HDPE drums.

     

  2. Bio-Dispersants

    Comments Off on Bio-Dispersants

     

    MBR – 20p

    (Microbial debris dispersant)

     

    General Description:           

    MBR-20p is a versatile, very effective dispersant.  It removes slime from the system rendering it neat and clean.  It uniformly disperses chlorine and biocides in the entire system and prevents corrosion and enhances heat transfer efficiency.

     

    Physical properties:

    Appearance              :           Colorless, clear liquid.

    Odor                            :           Slightly pungent.

    Specific gravity       :           0.90 to 0.91 at 25 deg.C.

    Viscosity                    :           40- 45 cp at 30 deg.C.

    PH                                :           5.5 – 6.5

     

    Advantages:

     

    • Enhances the anti-microbial activity of biocides and chlorine.
    • Minimize the foul smell in the system.
    • Compatible with phosphate system of treatment.
    • Disperses microbial debris and prevent it from settling.
    • Excellent low-foam surfactant.
    • Non-corrosive and harmless to cooling tower woods.
    • Non- Toxic and Non-pollutant.
    • Biodegradable and leaves no residue in the system.

    Dosage:

    • MBR-20p can be fed to the cooling water or makeup water at the dosage  rate of 2pm to 5 ppm in the recirculating water.  Continuous feeding is preferable and normal materials of feed pump construction will be suitable.

     Packing:

    • Our products are supplied in non-returnable 50/100kg.HDPE carboys and 200 kg HDPE drums.
  3. Dispersants

    Comments Off on Dispersants

    STRESSPERZ (Scale inhibitor/ Multipurpose dispersant)

    General description:

    SRESSPERZ is a versatile, very effective scale inhibitor and multipurpose dispersant.  Controls formation of calcium/ magnesium/iron based scales and combines with many inorganic impurities and prevents their precipitation.

    It is especially useful when the cooling water contains iron, phosphate and carbonate. It is every effective up to pH 8.5.  In the absence of this polymeric dispersant, iron phosphate will get precipitated and settle as deposits over the surfaces.

     

    Physical properties:

     

                            Appearance               :           Clear colorless to pale yellow liquid.

                            Specific gravity        :           1.15 –1.20

                            PH                                 :           6 – 6.5

                            Total solids                :           22% minimum

                            Viscosity                     :           40- 50 cps

                            % of monomer          :           0.1% maximum.

     

    Advantages:

     

    • Prevents scale formation and corrosion.
    • Enhances heat transfer efficiency of the system.
    • Compatible with phosphate system of treatment in cooling towers,
    • Biodegradable and leaves no residue in the system.
    • Uniformly disperses Zinc, Iron, inorganic precipitates, organic sludge and air-borne dust.
    • Anti-corrosive and Anti-fouling agent.

                                                                                                                                    

     

    Dosage:

     

    • STRESSPERZ can be fed to the cooling water or makeup water at a rate sufficient to provide a product dosage of 40ppm to 100 ppm in the recirculating water.  Routine residual testing is normally unnecessary.  STRESSPERZ can be fed neat or from any convenient aqueous dilution.  Continuous feeding is preferable and normal materials of feed pump construction will be suitable.

     

    Packing:

    • Our products are supplied in non-returnable 50/100kg.HDPE carboys and 200 kg HDPE drums.
  4. Non-Oxidizing Biocide

    Comments Off on Non-Oxidizing Biocide

    TA-101(Broad spectrum Bactericide /Algaecide)

     

    General Description:

    TA-101 is a broad spectrum Bactericide/ Algaecide, Slimicide, lethal to Iron Oxidizing and Sulfur reducing bacteria, specially designed for economical treatment of Microbial control in recirculating cooling water system.

     

    Physical Properties:

     

                                        Appearance   :           Viscous, clear, yellowish orange liquid

                                        Odour              :           Pungent

                                        PH                     :           2.5 – 3.0 (15 % solution)

                                        Density            :           1.00 – 1.125 at 25 deg. C.

                                        Viscosity         :           20-28 cp at 25 deg. C.

     

    Advantages:

    • TA-101 effectively controls Iron Oxidizing and Sulfur reducing bacteria and other slime-forming microorganism.
    • Compatible with phosphate system of treatment in cooling towers.
    • Biodegradable and leaves no residue in the system.

     

    Dosage:

    • TA-101 should be dosed directly in cooling tower basin in slug dose of 30ppm to 50ppm, depends on the quality of feed water and the operating parameters.

     

    Packing:

    • Our products are supplied in non-returnable 50/100kg.HDPE carboys and 200 kg HDPE drums.

     

    SB-2(Broad spectrum Fungicide/Algaecide)

     

    General Description:      

     

    SB-2 is a broad spectrum Fungicide/Algaecide, very effective against various species of water borne fungal and algal species, which grow in open recirculating cooling water system.

     

    Physical Properties:

     

                                        Appearance   :           Light tan or clear, colorless liquid.

                                        Odour              :           Pungent

                                        PH                     :           8.5 – 9.0 (1 % solution)

                                        Density            :           1.00 – 1.1 at 25 deg. C.

                                        Viscosity         :           10 cp at 25 deg. C.

     

    Advantages:

    • SB-2 effectively control algae, molds and rots.
    • Compatible with phosphate system of treatment in cooling towers.
    • Biodegradable and leaves no residue in the system.

     

    Dosage:

    • SB-2 should be dosed directly in cooling tower basin in slug dose of 30ppm to 50ppm, depends on the quality of feed water and the operating parameters.

     

    Packing:

    • Our products are supplied in non-returnable 50/100kg.HDPE carboys and 200 kg HDPE drums.
  5. Oxidizing Biocide

    Comments Off on Oxidizing Biocide

     KHLORAX – 786

     General Description:

     

    Khlorax – 786  is a precursor  for Chlorine di oxide, it is a powerful oxidizing chemical and it contains 2.5 times the oxidizing potential of chlorine .Khlorax – 786 is very effective   to treat algae/slime and effective against various water borne species,which grow in open recirculating cooling water systems.The organic contaminants are readily oxidized and chemically dispersed for ease removal  by bleed off.

     

    Physical Properties:

     

              Appearance         :        Colourless liquid

              Odour                    :        Mild

              pH                           :        10.5 – 11.0

              Density                  :       101 – 1.2 @ 25 deg C

              Water Solubility:        Freely soluble in water.

              Viscosity               :       20 – 55 cp @ 25 deg C.

     

    Advantages:

    •  Khlorax – 786 is  effectively control algae, molds and rots.
    • Compatible with phosphate system of treatment in cooling towers.
    • Biodegradable and leaves no residue in the system.


    Packing:

     

    • Our products are supplied in non-returnable 50/100kg.HDPE carboys and 200 kg HDPE drums.