Sicagen

Archive

  1. Cleaners

    Comments Off on Cleaners
  2. Biocides / Preservatives

    Comments Off on Biocides / Preservatives

    BIOSAN(Microbiocide for Cooling water system)

    Product Function:

    • Broad spectrum Micro Biocide.
    • Very effective against various species of water  borne Algal / Fungal/Bacterial species which grow in cooling water system.

     Principle Application:

    • Used in sugar cane milling section
    • Sugar quality and purity management
    • Sterilization of equipments

     

    Product Specification:

    Appearance                 :           Clear, Colorless liquid.

    Odor                             :           Slightly pungent odor

    Specific gravity           :           1.08 – 1.09

    Viscosity                      :           12 cp at 25 deg.C.

    PH of 1 % solution     :           8 – 9

     

    Advantages:

    • Lethal to fungus, molds and rots.
    • Low dosage, hence economical
    • No continuous dosage is required.
    • Leaves no residue in the system
    • Miscible freely with water and does not cause any turbidity.
    • Non-corrosive and harmless to equipment.
    • Easy handling
    • Bio – degradable.

     

    Dosage:

    Specific dosage vary from system to system depending upon the extend of microbial contamination and weather cycles.  Administration in shock dose at regular frequency and at a suitable point will yield excellent results.

     

    Storage and handling:

    • Keep in cool and dry area in tightly closed container.
    • Protect from strong light and heat.
    • Wear personal protective appliances while handling and transporting.
    • Do not spill on the body.

     

    Packing:

    • Our products are supplied in non-returnable 50/100kg.HDPE carboys and 200 kg HDPE drums.

     

    BIOSAN-H(Broad spectrum Fungicide/Algaecide)

     

    General Description:

    Biosan-H  is a broad spectrum Fungicide/Algaecide, very effective against various species of water borne fungal and algal species, which grow in open recirculating cooling water system.

     

    Physical Properties:

     

                                        Appearance   :           Light tan or clear, colorless liquid.

                                        Odour              :           Pungent

                                        PH                     :           8.5 – 9.0(1 % solution)

                                        Density            :           1.00 – 1.1 at 25 deg. C.

                                        Viscosity         :           10 cp at 25 deg. C.

     

    Advantages:

    • Biosan -H effectively control algae, molds and rots.
    • Compatible with phosphate system of treatment in cooling towers.
    • Biodegradable and leaves no residue in the system.

     

    Dosage:

    • Biosan – H should be dosed directly in cooling tower basin in slug dose of 30ppm to 50ppm, depends on the quality of feed water and the operating parameters.

     

    Packing:

    • Our products are supplied in non-returnable 50/100kg.HDPE carboys and 200 kg HDPE drums.

     

    BIOMAC

    (Broad spectrum Fungicide/Algaecide)

     

    General Description:

    Biomac is a broad spectrum Fungicide/Algaecide, very effective against various species of water borne fungal and algal species, which grow in open recirculating cooling water system.

     

    Physical Properties:

     

                Appearance               :           Light tan or clear, colorless liquid.

                Odour                          :           Pungent

                PH                                 :           8.5 – 9.0 (1 % solution)

                Density                        :           1.00 – 1.1 at 25 deg. C.

                Viscosity                     :           10 cp at 25 deg. C.

     

    Advantages:

    Biomac effectively control algae, molds and rots.

    Compatible with phosphate system of treatment in cooling towers.

    Biodegradable and leaves no residue in the system.

     

    Dosage:

    Biomac should be dosed directly in cooling tower basin in slug dose of 30ppm to 50ppm, depends on the quality of feed water and the operating parameters.

     

    Packing:

    Our products are supplied in non-returnable 50/100kg.HDPE carboys and 200 kg HDPE drums.

  3. Antiscalant (High and Low Silica)

    Comments Off on Antiscalant (High and Low Silica)

    MACSCAL-Antiscalent

    Product Function:

    • Versatile, very effective scale inhibitor and multipurpose Antiscalent.
    • Controls formation of Calcium / Magnesium/Silica based scales.
    • Combines with many inorganic impurities and prevents their precipitation

     

    Principle Application:

     

    • Direct into the Semikeshner and Evaporators along with sugar juice.
    • Sugar quality management.

     

    Product Specification:

     

                           Appearance                 :           Clear, colorless, aqueous liquid.

    Odor                            :           Odorless

    PH                               :           6.5 – 7.0

    Viscosity                     :           10 – 12 cp at 30 deg.C.

    Density                        :           1.0- 1.1 g/ml.

    Solubility                     :           Freely soluble in water

     

     Advantages:

                      

    •  Prevents scale formation
    •  Enhances the heat transfer efficiency of the system
    •  Increases the life of the heat transferring equipments
    •  Miscible freely with water and does not cause any turbidity or frothing.
    •  Long shelf life and high stability under ambient conditions.
    •  Biodegradable.

     

    Dosage:

     

    Specific dosage vary from system to system depending upon the extend of scales existing, Process condition, sugar juice quality, process slurry contamination etc., While using our product MACSCAL an initial dose of 25 ppm may be required.  After achieving desirable results in the system, dosage of MACSCAL can be reduced accordingly.  It is added into the system at the entry point of ‘SEMIKESHNER and EVAPORATORS.

     

    Storage and handling:

     

    • Keep in cool and dry area in tightly closed containers.
    • Protect from sun light and heat.
    • Wear personal protective appliances while handling and transporting.

     

    Packing:

    • Our products are supplied in non-returnable 50/100kg.HDPE carboys and 200 kg HDPE drums.